Gildan T-Shirt - 8000

Pressing Instructions:

• Press at 310°F / 155°C for 13 seconds with medium to high pressure using a dry iron (no steam).
• To avoid direct contact with the garment, use parchment paper or a protective guard sheet.
• Applying extra heat, pressure, or time won’t damage the transfer but may scorch the garment. If scorching occurs, reduce the pressure first; if needed, lower the temperature by 10-15°F while keeping the reduced pressure.

Peeling Process:

• Let the transfer cool for 15-30 seconds before peeling.
• Peel slowly, monitoring to ensure all parts of the design adhere properly.
• If any part doesn’t stick, reapply the transfer, increasing the pressure and heat by +15°F. If necessary, increase the temperature in 15°F increments until successful adhesion.

Final Press for Finish:

• After peeling, cover the design with parchment paper or a single layer of t-shirt fabric and press for another 15 seconds.
• This step improves durability and softens the design, also reducing shine. If a glossy finish is desired, use a guard sheet instead for the final press.

Washing Instructions:

• For longevity, wash the garment inside out in cold water. Dry on low heat or hang to dry.
• Standard wash settings are fine, but delicate settings further extend the design’s life.