Skip to content
DTF SILVER PLAN
$499.00
DTF SILVER PLAN
Product Description
Steps for printing DTF transfers
Pressing Instructions:
- Press at 310°F / 155°C for 13 seconds with medium to high pressure using a dry iron (no steam).
- To avoid direct contact with the garment, use parchment paper or a protective guard sheet.
- Applying extra heat, pressure, or time won’t damage the transfer but may scorch the garment. If scorching occurs, reduce the pressure first; if needed, lower the temperature by 10-15°F while keeping the reduced pressure.
Peeling Process:
- Let the transfer cool for 15-30 seconds before peeling.
- Peel slowly, monitoring to ensure all parts of the design adhere properly.
- If any part doesn’t stick, reapply the transfer, increasing the pressure and heat by +15°F. If necessary, increase the temperature in 15°F increments until successful adhesion.
Final Press for Finish:
- After peeling, cover the design with parchment paper or a single layer of t-shirt fabric and press for another 15 seconds.
- This step improves durability and softens the design, also reducing shine. If a glossy finish is desired, use a guard sheet instead for the final press.
Washing Instructions:
- For longevity, wash the garment inside out in cold water. Dry on low heat or hang to dry.
- Standard wash settings are fine, but delicate settings further extend the design’s life.